Comparison
Darkglass Microtubes X Ultra Bass Preamp Pedal with Variable Lowpass/Highpass Filters, 6-band Graphic EQ
Code: MICROTUBES X ULTRA
Brand: Darkglass
Categories: Bass Guitar Pedals & Effects , Bass Graphic EQ
The Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.
Microtubes X Ultra Bass Preamp Pedal With Variable Lowpass/Highpass Filters, 6-band Graphic EQ from Darkglass is 100% original and brand new. We, at Melody House take pride in our after sales service and support. For further details on the Microtubes X Ultra Bass Preamp Pedal With Variable Lowpass/Highpass Filters, 6-band Graphic EQ, Darkglass, simply write to us to consult an expert or order online and we will take care of the rest. Happy Shopping!
Low Comp | Controls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Su |
Low Level | Sets the output volume of the low-pass signal. |
Low Pass Frequency | Controls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids. |
High Level | Sets the output volume of the distorted high-pass signal. |
High Drive | Sets the amount of distortion for the high pass side. |
High Pass Frequency | Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition. |
Master | +-12 dB. Sets the overall volume of the unit. |
Low shelf | +-12 dB @ 80 Hz. |
250 Hz / 500 Hz / 1,5 kHz / 3 kHz | +-12dB. |
High shelf | +-12 dB @ 5 kHz. |
Direct Output | Balanced XLR output for connecting the pedal to a microphone preamp, PA system, etc. |
Ground lift | Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output. |
Cab Sim | Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed. |
Bring big and powerful bass sounds with one of the smallest and light bass amp heads ever; the Gallien-Kruger MB200. Weighing only 910 grams (2 lbs), and only about the size of a book, it's hard believe this head can produce up to 200 watts of power! GK's amazing solid state circuitry keeps the weight and size down while still packing serious power.
And it isn't bare bones, you get a 4-band EQ for flexibility. There is also a Contour toggle switch for instantly summoning the "V"-curve EQ; scooping the mids and boosting highs and lows for that modern rock sound. And with an XLR direct out with pre/post EQ selector, headphone/line output, and a Speakon output, you have a handy tool for practice, studio sessions, or big gigs!
MB 200 Watt 4 Ohm Ultra Light Solid State Bass Head from GK is 100% original and brand new. We, at Melody House take pride in our after sales service and support. For further details on the MB 200 Watt 4 Ohm Ultra Light Solid State Bass Head, GK, simply write to us to consult an expert or order online and we will take care of the rest. Happy Shopping!
Type | Ultra Portable Bass Amplifier Head |
Wattage | 200 watts @ 4 ohms / 140 watts @ 8 ohms |
Channels | 1 |
Tubes | NA |
Controls | Pad switch, Gain, Contour switch, Treble, Hi-Mid, Lo-Mid, Bass |
Output Impedance | 4 ohms / 8 ohms |
Effects Loop | No |
Built-in Effects | No |
Inputs | 1/4" Instrument input, 1/8" Aux input |
Outputs | Speakon Outputs, 1 x XLR Direct Out, 1/4" Headphone/Line Out |
Included | User Manual, Power Cord |
Dimensions (HxWxD) 2.5 x 7.75 x 8.0 inches / 1.75" height if without rubber feet | |
Weight | 0.91 kg |